Quartus

Bidirectional pin <name> missing source


CAUSE: In a Block Design File (.bdf) or Graphic Design File (.gdf), the specified bidirectional pin is connected to a named signal, but the named signal has no source other than the bidirectional pin. Each bidirectional pin must be connected to a source signal.
ACTION: The Quartus II software will connect the bidirectional pin to GND. To avoid receiving this message in the future, connect the bidirectional pin in the design to a source signal, or delete the bidirectional pin if it is not used.

- PLDWorld -

 

Created by chm2web html help conversion utility.