Quartus

Ignoring SignalTap II instance <name> with signal set <name>


CAUSE: You did not assign any signals to the current signal set in the SignalTap II File (.stp), or you attempted to acquire signal(s) from the sld_signaltap or sld_hub entity, and then compiled the design. As a result, the Quartus II software is ignoring the specified instance with the specified signal set.
ACTION: Assign signal(s) to the signal set or remove signal(s) from the signal set.

See also:

Overview: Using the SignalTap II Logic Analyzer

- PLDWorld -

 

Created by chm2web html help conversion utility.