Quartus

SignalTap II File requires clock signal


CAUSE: You opened a SignalTap II File (.stp), but the file does not contain a clock signal, or you defined more than one clock signal in the STP File.
ACTION: Define one signal as the clock in the SignalTap II Logic Analyzer. If you do not specify the clock signal, the Quartus II software will automatically create a clock pin called <stp-external-clock>. You must make an assignment to this pin.

See also:

Overview: Using the SignalTap II Logic Analyzer

- PLDWorld -

 

Created by chm2web html help conversion utility.