| CAUSE: | You assigned the Multicycle timing assignment, but did not specify frequency requirements for the clock signals in the design. You can use Multicycle assignments only when you specify clock frequency requirements. Therefore, the Quartus II software is ignoring the Multicycle assignment(s). |
| ACTION: | No action is required. If you want to use the Multicycle assignment, you must first specify the frequency requirements for the clock signals in the design. |
See also:
Creating Clock Settings
Overview: Using the Timing Analyzer
Running a Timing Analysis
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |