TRADEMARKS

Synopsys, the Synopsys logo, ARC, Certify, Design Compiler, DesignWare, HAPS, HapsTrak, Identify, Synplicity, Synplify, Synplify Pro, and VCS are registered trademarks or trademarks of Synopsys, Inc.

LSI is a trademark of LSI Corporation. The LSI logo is a registered trademark of LSI Corporation.

NVIDIA and the NVIDIA logo are registered trademarks of NVIDIA Corporation in the United States and other countries.

Xilinx, Inc., XILINX, the Xilinx logo, ChipScope, CORE Generator, ISE, MicroBlaze, Spartan, System ACE, and Virtex, are trademarks of Xilinx in the United States and other countries.

ARM, the ARM logo, and AMBA are registered trademarks of ARM Limited. AHB, APB, AXI, Cortex, and Mali are trademarks of ARM Limited. “ARM” is used to represent ARM Holdings plc; its operating company ARM Limited; and its regional subsidiaries. ARM, the ARM logo, and AMBA are registered trademarks of ARM Limited.

All other brands or product names are the property of their respective holders.

DISCLAIMER

All content included in this FPGA-Based Prototyping Methodology Manual is the result of the combined efforts of Synopsys, Inc., Xilinx, Inc., and other named contributors. Because of the possibility of human or mechanical error, neither the authors, contributors, Synopsys, Inc., Xilinx Inc, nor any of their affiliates guarantees the accuracy, adequacy or completeness of any information contained herein and is not responsible for any errors or omissions, or for the results obtained from the use of such information. THERE ARE NO EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE relating to the FPGA-Based Prototyping Methodology Manual. In no event shall the authors, contributors, Synopsys, Inc., Xilinx, Inc., or their affiliates be liable for any indirect, special or consequential damages in connection with the information provided herein.

THE XILINX HARDWARE FPGA AND CPLD DEVICES REFERRED TO HEREIN (“PRODUCTS”) ARE SUBJECT TO THE TERMS AND CONDITIONS OF THE XILINX LIMITED WARRANTY WHICH CAN BE VIEWED AT http://www.xilinx.com/warranty.htm. THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY USE OF PRODUCTS IN AN APPLICATION OR ENVIRONMENT THAT IS NOT WITHIN THE SPECIFICATIONS STATED IN THE XILINX DATA SHEET. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. PRODUCTS ARE NOT DESIGNED OR INTENDED TO BE FAIL-SAFE OR FOR USE IN ANY APPLICATION REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS LIFE-SUPPORT OR SAFETY DEVICES OR SYSTEMS, OR ANY OTHER APPLICATION THAT INVOKES THE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). USE OF PRODUCTS IN CRITICAL APPLICATIONS IS AT THE SOLE RISK OF CUSTOMER, SUBJECT TO APPLICABLE LAWS AND REGULATIONS.