Quartus

Can't place <name> pin to HSDI receiver pin location


CAUSE: You assigned an I/O standard to the specified pin in a HSDI receiver pin location. However, the Fitter cannot place the pin because of one of the following reasons:
  • PCI I/O logic option cannot be turned on with any I/O standard.

  • PCI, PCI-X, AGP 1x, and AGP 2x I/O standards are not allowed for either input or output pins.

  • GTL+ I/O standard outputs are not allowed.

  • 1.8-V I/O standard outputs at maximum current strength are not allowed.

  • HSTL Class I & II I/O standard outputs are not allowed.

  • SSTL-2 Class I & II I/O standard outputs at maximum current strength are not allowed.

ACTION: Change either the I/O standard or location assignment for the pin.

- PLDWorld -

 

Created by chm2web html help conversion utility.