Quartus

GTL+ I/O standard and 1.8-V I/O standard cannot be assigned to pins in the same I/O bank


CAUSE: You assigned both a GTL+ I/O standard, which is an open-drain I/O standard, and a 1.8-V I/O standard to pins in the same I/O bank. You cannot assign the GTL+ I/O standard and the 1.8-V I/O standard in the same I/O bank because these standards require different VREF voltages.
ACTION: Assign these different voltage I/O standards to separate I/O banks.

See also:

Assigning I/O Standards to Pins
Assigning Pins
Overview: Making Assignments

- PLDWorld -

 

Created by chm2web html help conversion utility.