CAUSE: | You assigned the specified I/O standard to the specified HSDI transmitter or receiver input or output pin, but the specified I/O standard is not a differential I/O standard. As a result, the Fitter used the LVDS I/O standard for the pin by default. You must assign only the LVDS, LVPECL, or 3.3-V PCML I/O standard to an HSDI transmitter or receiver input or output pin. |
ACTION: | Delete the assignment, or change the assignment to the LVDS, LVPECL, or 3.3-V PCML I/O standard for the pin. |
See also:
Assigning I/O Standards to Pins
Changing Assignments
Deleting Assignments in the Assignment Organizer Dialog Box
Overview: Making Assignments
- PLDWorld - |
|
Created by chm2web html help conversion utility. |