CAUSE: | You made pin and I/O standard assignments in the design. However, the Fitter is unable to place the pins because the design either contains too many pins or too many conflicting I/O standards for the target device. |
ACTION: | Select a larger device for the design or reduce the number of I/O standards. |
See also:
Assigning I/O Standards to Pins
Assigning an Entity or Node to a Location
Assigning Pins
Changing Assignments
Overview: Making Assignments
Overview: Working with Assignments in the Floorplan Editor
Specifying the Device and the Device Family for Compilation
- PLDWorld - |
|
Created by chm2web html help conversion utility. |