CAUSE: | The specified Excalibur stripe signal has not been routed correctly. If the signal is not routed correctly, the device will fail to function properly when the PLD portion of the specified device is reconfigured. |
ACTION: | Turn off the Remove Redundant Logic Cells logic option and rerun the Excalibur MegaWizard Plug-In, which is available from the MegaWizard Plug-In Manager to ensure that the stripe signal is routed correctly. For more information on the routing of stripe signals, refer to the specified Embedded Processor PLDs Errata Sheet, which is available from the Literature section of the Altera web site. For additional information, contact Altera Applications. |
See also:
- PLDWorld - |
|
Created by chm2web html help conversion utility. |