CAUSE: | The specified default I/O standard for the specified HSDI transmitter or receiver input or output pin is not applicable to differential signals. As a result, the Fitter used the LVDS I/O standard. You can assign only the LVDS or LVPECL I/O standard to a HSDI transmitter or receiver input or output pin. |
ACTION: | If you want to use the LVDS I/O standard for the HSDI transmitter or receiver input or output pin, no action is required. Otherwise, delete the assignment, or change the assignment to the LVPECL I/O standard for the HSDI transmitter or receiver input or output pin. |
- PLDWorld - |
|
Created by chm2web html help conversion utility. |